Tell the QA story in one screen
The donut shows your acceptance mix; the bar chart shows where rejects are coming from. Together they answer the two questions every QA review opens with — without you assembling a deck.
NDT Metrics module
NDE metrics worth talking about in the QA meeting
Acceptance rate by method, reject causes by category, and a clean view of repair backlog by welder and inspector. Not a chart for the chart’s sake.
- Acceptance rate by method (RT, UT, PT, MT)
- Reject causes broken out by category
- Repair backlog by welder and inspector
- Period filters (Q1, Q2, last 90 days, custom)
Backlog you can act on
Repair backlog is broken out by welder and inspector so you can see where the bottleneck is. Click through to the open welds and assign the next pass.
What you get
Per-method acceptance
Compare RT, UT, PT, and MT acceptance side by side, weighted by weld inch diameter.
Root-cause buckets
Reject causes (porosity, crack, slag, LOF, undercut, misalign) categorized for the weekly review.
Inspector view
Spot inspector-specific patterns early so calibration sessions happen before disputes.
Frequently asked questions
Can I set a target reject rate?
Yes. Targets per method are configurable per project; deviations highlight on the dashboard so you see them at a glance.
Where do the categories come from?
Reject categories follow the standard piping NDE taxonomy (porosity, crack, slag inclusion, lack of fusion, undercut, misalignment, etc.). Custom categories are supported per project.
Does this filter to a specific date range?
Yes. The period selector supports Q1 / Q2 / last 90 days as well as a custom range, and the dashboard recalculates accordingly.